JOIN extra assembly help

Just in case you need some more help assembling your JOIN shelving system we've included some additional photos and video steps. Please use with our installation guides for the complete assembly. 

Fitting the door video & Steps

1. Screw in the socket screw into the side panel.

 

2. Use a hex key to tighten it slightly, don't over tighten you can normally feel it on the other side of the side panel.

 

3. It should look like this, perpendicular from the panel.

 

4. Hold the door and slide one end of the door onto the socket screw, there should be a nylon washer already inserted in the door hinge as shown.

 

5. The door is now located onto one side panel

 

 6. Keep holding the door in position and connect the other side

 

7. Position the door hinge over the side panel fixing hole

 

8. Screw the socket screw through the hinge and into the fixing hole and tighten as the other side

 

8. Screw on both the hinge caps to finish

 

9. Connect the flap stays to the door and screw in both the bolts using a hex key

 

10. Tighten the bolts using the key on both sides, don't over tighten

 

10. Both sides should look like this

 

We'll be adding more steps soon.